• <input id="qmcgq"><wbr id="qmcgq"></wbr></input>
  • Y-bearings

    > > >
    Y-bearings models
    Feature
    Y-bearings
    Features:
    Y-bearings, which are usually referred to as insert bearings, are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.
    Y-bearings are available singly or as units. Y-bearing units consist of a housing, bearing and seal that is preassembled and greased at the factory. These ready-to-mount units can accommodate moderate initial misalignment but normally do not enable axial displacement of the shaft.

    Y-bearings and Y-bearing units offer a simple, cost-effective solution that can provide a number of benefits.

    Product range features for Y-bearings:
    1) Designed for quick, easy and safe mounting
    2) Sealed, greased and ready to mount
    3) Multiple sealing solutions available
    4) Virtually maintenance-free variants available
    5) Available in different designs, materials and sizes
    6) Standard and food grade greases available
    7) In accordance with ISO

    User benefits for Y-bearings:
    1) Increased productivity
    2) Reduced maintenance cost
    3) Reduced environmental impact
    4) Long bearing service life
    5) Reduced noise and vibration levels
    6) Quick, easy and safe to replace

    Applications for Y-bearings:
    Because of their versatility, and cost effectiveness, Y-bearings are typically found in the following applications:
    Agricultural machinery
    Food and beverage processing and packaging
    Conveyor systems
    Material handling systems
    Textile equipment
    Industrial fans
    Special machinery (e.g. car wash systems, gym equipment, go-karts)

    Y-bearings can be divided into below series:
    UC200 series (Normal duty )
    UC300 series ( Heavy duty )
    UEL series
    UK+H2300 series
    SA/UE200 series
    SB/MT200 series
    SC200 series

    Parameter:
    Id (mm) Inside diameter Tolerance of inner race width Bi Tolerance in radial run-out
    UC,HC,UR,SER,SA,SB SC
    Tolerance of dm Tolerance of d Tolerance of dm Tolerance of d
    over incl. max min max min max min max min max min max
    10 18 +15 0 +19 -4 0 -8 +3 -11 0 -120 15
    18 31.75 +18 0 +22 -4 0 -10 +3 -13 0 -120 18
    31.75 50.8 +21 0 +25 -5 0 -12 +3 -15 0 -120 20
    50.8 80 +24 0 +28 -6 - - - - 0 -150 25
    80 120 +28 0 +32 -7 - - - - 0 -200 30
    120 180 +33 0 +37 -8 - - - - 0 -250 35

    Remark: dm is an average diameter calculated from two point measurement of the minimum and maximum diameter.

    Product Catalog
    三张牌炸金花